Foshan Nanhai Fodi Machinery

Before we quote for you we need know the following:

1:are you raw material 1300mm or 1600mm width？

2:are you material galvanized steel or stainless steel？

3:is it 0.5-1.2mm or 0.5-1.5mm thickness for your raw material？

4:how many raw material rack you need? 1 rack with two coils or 2 rack with 4 coils? And more 1 rack with 1 motor or 1 rack with 2 motors？

5:is it TDF flang,TDC flange ,C+S flange,Angle Steel flange,Slip & Drive？

The air duct automatic production line difference please refer to : https://www.youtube.com/watch?v=cZCTg1SixWU

 Please Note:The price and quality of the air duct production line also depends on the following factors:

1: Whether the servo motor is a European and American brand, a well-known Chinese brand, or an unknown brand, the power of the servo motor, how long the servo motor can work continuously, the price of a server varies by more than 1,200 US dollars. Our servo motor brand is Japanese Yaskawa, which can guarantee that it will work 18 hours a day and have no problems for 5 years.

2: What is the most important material used to press the groove part in roll forming on the air duct production line, and what is the material of the roller,axis. using Gr12, Gr15, Gr40 or ordinary steel? The material we use for roll forming to press the groove part is Gr12, and the roller material is Gr15. The price difference between the same machine appearance is more than 1,400 US dollars. We can guarantee that our rollers will work 8 hours a day and have no problems for 5 years

3: Is the iron plate laid on the main unit a whole iron plate or a small welded iron plate? How thick is it? Has it been finely ground, quenching and tempering? Ours is cut from a 12mm solid iron plate and undergoes finely ground, quenching and tempering. Most of our peers use small pieces of 8mm thick iron plates welded together without finishing finely ground, quenching and tempering.

4: The square tube supporting the machine is usually 2.75mm thick, 100x100mm, and the main part is 5mm. Most of our peers use 2mm, 60x60mm.

5:The decolier is manual driven or motor driven? A decolier with two coils or one? The loading capacity? Price difference can be 1200US dollars

Please Note:The price of the air duct production line also depends on the following factors:

1. All the air duct automatic production line has two types models, 1300mm Model & 1600mm Model,please check for the raw material size.

2. The air duct automatic production line V,VI,VII,VIII can upgrade to 2 bite machines to form the Pittsburgh seam(also called female part) and the single seam(7mm part,also called male part) which means the machine will change the bite machine according to the thickness of the raw material, the working range can do 0.5-1.5 Galvanized steel and 0.5-1.2 stainless steel 304.

3. The air duct automatic production line V,VI,VII,VIII can form the following flanges, so the price is different according to which flange and how many flange forming you want. The machine is composed of different modules as below

TDF Flange 

Usually come with TDF cleat forming machine,using TDF cleat to connect two air ducts

      For TDF forming and TDF cleat forming machine: https://www.youtube.com/watch?v=KEm9tMeDwyo

      For TDF forming,TDF cleat forming cutting machine: https://www.youtube.com/watch?v=7cyTyXmXtVs                                                    

CS Insert Flange(mainly used in some part of china),

Angle Steel Flange(mainly used for big air duct)

Need angle steel to connect with the air duct.

For angle steel punching machine please refer to:https://www.youtube.com/watch?v=9sVU66_WAEE

For angle steel welding machine please refer to: https://www.youtube.com/watch?v=8H9RoeEkq48

To connect the angle steel flange to Angle Steel air duct：https://youtube.com/shorts/P2dAGRgRiJM

TDC Insert Flange

Usually need come with TDC forming machine to form the ductmate to connect with the air duct

For TDC forming machine please refer to :https://www.youtube.com/watch?v=_dTP3LVxS_M

To connect the TDC flange to TDC air duct:https://youtube.com/shorts/P2dAGRgRiJM

   Slip & Drive Air Duct

       https://youtu.be/3FeapFclTvI

       Need small machine to form the S Lock and C type: https://youtu.be/yuPaNsYNZME

http://www.roll-forming-factory.com/

https://www.youtube.com/channel/UC953yrXbPzcsxC_Ar5-zXzA

https://www.facebook.com/profile.php?id=100091982981887

WhatsApp:+8618620115850     Mob:+8618620115850

salesmanager@roll-forming-factory.com

About Our Factory: https://www.youtube.com/watch?v=-e8oV9PLKx4